Lcd Control; Bios Menu 17: Lcd Control - IEI Technology HYPER-AL series User Manual


64M

128M

256M

512M

DVMT Total Gfx Mem [MAX]
Use the DVMT Total Gfx Mem option to select DVMT5.0 total graphic memory size used
by the internal graphic device. The following options are available:

128M

256M

MAX

5.4.1.2 LCD Control

Use the LCD Control submenu (BIOS Menu 17) to select a display device which will be
activated during POST.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Chipset
LCD Control
Primary IGFX Boot Display
LVDS Panel Detect
On board LVDS
Panel Setting
Backlight Control Mode
Backlight Control Type
Backlight Control Voltage Level [3.3V]
LCD Panel Type
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.

BIOS Menu 17: LCD Control

Page 66
D
EFAULT
D
EFAULT
[Auto]
[INSTALLED]
[Disabled]
[LED]
[PWM]
[800x600 18bit]
HYPER-AL SBC
Select the Video Device which
will be activated during POST.
This has no effect if external
graphics present. Secondary
boot display selection will
appear based on your
selection. VGA modes will be
supported only on primary
display.
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit