Technical Specifications - IEI Technology HYPER-AL series User Manual

HYPER-AL SBC

1.6 Technical Specifications

HYPER-AL technical specifications are listed below.
Specification
Form Factor
SoC
BIOS
Memory
Graphics
Display Output
Ethernet
Digital I/O
Embedded Controller
Watchdog Timer
I/O Interface
Audio Connector
Ethernet
Front Panel
Serial Ports
USB Ports
Storage
Expansion
HYPER-AL
Pico-ITX
® ®
Intel Celeron N3350 on-board SoC
(up to 2.4 GHz, dual-core, 2 MB cache, TDP=6 W)
AMI UEFI BIOS
One 204-pin 1867/1600 MHz single-channel DDR3L SDRAM
SO-DIMM slot (system max. 8 GB)
th ®
9 generation Intel HD Graphics with 18 execution units,
supporting 4K codec decode & encode for HEVC 4, H.264,
VP8, SVC and MVC
1 x HDMI
1 x 18-bit/24-bit single-channel LVDS
Dual Realtek RTL8111H PCIe GbE controller
8-bit digital I/O by 10-pin (2x5) header
ITE IT8587VG
Software programmable support 1~255 sec. system reset
1 x Front audio by 10-pin (2x5) header
2 x RJ-45 GbE port
1 x Front panel by 10-pin (2x5) header
(power LED, HDD LED, power button, reset button)
1 x RS-232 by 9-pin (1x9) wafer
2 x USB 3.0 on rear I/O
2 x USB 2.0 by 8-pin (2x4) header
1 x SATA 6Gb/s with 5 V SATA power connector
1 x M.2 2230 slot (A key, PCIe + USB signal)
1 x M.2 2242 slot (B key, SATA + USB signal)
Page 7