IEI Technology HYPER-AL series User Manual page 57

Pico-itx sbc with 14nm intel celeron n3350 soc, hdmi, lvds, dual pcle gbe, usb 3.0, m.2 slots, sata6g/s, rs-232, hd audio and rohs

Table of Contents

HYPER-AL SBC

Figure 4-6: SATA Drive Cable Connection

Step 3:

Connect the cable to the SATA disk. Connect the connector on the other end

of the cable to the connector at the back of the SATA drive. See Figure 4-6.

Step 4:

To remove the SATA cable from the SATA connector, press the clip on the

connector at the end of the cable.

Step 0:

Page 45

Table of Contents