Super Io Configuration; Bios Menu 7: Super Io Configuration - IEI Technology PM-PV-N4551/D5251 User Manual

PM-PV-N4551/D5251 User Manual

Legacy USB Support [Enabled]
Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard
support. Normally if this option is not enabled, any attached USB mouse or USB keyboard
does not become available until a USB compatible operating system is fully booted with all
USB drivers loaded. When this option is enabled, any attached USB mouse or USB
keyboard can control the system even when there is no USB driver loaded onto the
system.

Enabled

Disabled

Auto

5.3.5 Super IO Configuration

Use the Super IO Configuration menu (BIOS Menu 7) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
Super IO Configuration
Super IO Chip
> Serial Port 0 Configuration
> Serial Port 1 Configuration
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.

BIOS Menu 7: Super IO Configuration

D Legacy USB support enabled
EFAULT
Legacy USB support disabled
Legacy USB support disabled if no USB devices are
connected
ITE IT8718F
Set Parameters of Serial
Port 0 (COMA)
---------------------
: Select Screen
 : Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Page 65