Table of Contents
Advertisement
USB Devices
The USB Devices Enabled field lists the USB devices that are enabled on the system
Legacy USB Support [Enabled]
Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard
support. Normally if this option is not enabled, any attached USB mouse or USB keyboard
does not become available until a USB compatible operating system is fully booted with all
USB drivers loaded. When this option is enabled, any attached USB mouse or USB
keyboard can control the system even when there is no USB driver loaded onto the
system.
Enabled
Disabled
Auto
5.3.10 F81866 Super IO Configuration
Use the F81866 Super IO Configuration menu (BIOS Menu 12) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
F81866 Super IO Configuration
F81866 Super IO Chip
> Serial Port 1 Configuration
> Serial Port 2 Configuration
> Serial Port 3 Configuration
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 12: Super IO Configuration
Page 72
Legacy USB support enabled
D
EFAULT
Legacy USB support disabled
Legacy USB support disabled if no USB devices are
connected
F81866
NANO-QM770 EPIC SBC
Set Parameters of Serial
Port 1 (COMA)
---------------------
: Select Screen
: Select Item
Enter Select
F1
General Help
F2
Previous Values
F3
Optimized
Defaults
F4
Save
ESC
Exit
Advertisement
Table of Contents
