Super Io Configuration; Bios Menu 8: Super Io Configuration - IEI Technology KINO-PV-D5253-D4253 User Manual

K INO-P V-D5253-D4253 Mini-IT X Motherboard
 L egac y US B S upport [E nabled]
Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard
support. Normally if this option is not enabled, any attached USB mouse or USB keyboard
does not become available until a USB compatible operating system is fully booted with all
USB drivers loaded. When this option is enabled, any attached USB mouse or USB
keyboard can control the system even when there is no USB driver loaded onto the
system.

Enabled

Disabled

Auto
5.3.6 S uper IO C onfiguration
Use the Super IO Configuration menu (BIOS Menu 8) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced

Super IO Configuration

Super IO Chip
> Serial Port 0 Configuration
> Serial Port 1 Configuration
> Serial Port 2 Configuration
> Serial Port 3 Configuration
> Serial Port 4 Configuration
> Serial Port 5 Configuration
> Parallel Port Configuration
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.

BIOS Menu 8: Super IO Configuration

D Legacy USB support enabled
EFAULT
Legacy USB support disabled
Legacy USB support disabled if no USB devices are
connected
Finteck F81865
Set Parameters of Serial
Port 0 (COMA)
---------------------
: Select Screen
↑ ↓: Select Item
Enter :Select
+/-: Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save & Exit
ESC Exit
P age 63