Two-In-One Blade Holder E - Leica HistoCore AUTOCUT Instructions For Use Manual

6
Optional Accessories

6.3.3 Two-in-one blade holder E

1
2
3
4
5
Fig. 82
1 Blade ejector
2 Clamping top
3 Clamping lever (left)
4 Segment arc
5 Blade holder base
The two-in-one blade holder E is designed for conventional disposable blades and optimized to be used
with Surgipath disposable blades. It can be used for both high and low profile disposable blades. The
two-in-one blade holder E has a lateral displacement function, so that the entire width of the blade can
be used. It is equipped with a blade ejector to safely remove the blade after use. The pressure plate is
replaceable.
Tips
The clamping levers on the two-in-one blade holder E are not interchangeable. The two clamping
levers (→ "Fig. 82-8") (→ "Fig. 82-3")
isolated malfunctions of the two-in-one blade holder E can occur.
Clamping lever for the blade
(→ "Fig. 82-3") is at the left.
78
6 Safety guard
7 Bolt
8 Clamping lever (right)
9 Pressure plate
must remain in the position shown at all times, as otherwise
(→ "Fig. 82-8") is at the right, clamping lever for the lateral displacement
6
8
9
Version 1.1, Revision B
7