Ts02Plus: Is The Spot Size The Same As With The Ergofocus Telescope; Ts02Plus: Why Does The New Telescope Have No "Clack - Clack" Noise Anymore; Ts02Plus: Why Is There No P-Long (>4.0Km) Mode Available Like On The Ts02; Ts02Plus: Are Maximum Ranges The Same Like On Ts02 - Leica FlexLine Frequently Asked Questions Manual

2.11

TS02plus: Is the spot size the same as with the Ergofocus telescope?

Yes, it's the same: at 30m 7x10mm, at 50m 8x20mm.
2.12 TS02plus: Why does the new telescope have no "clack – clack" noise anymore?
Because the Ergofocus telescope follows a new opto-mecahnical design this is physically not required
anymore.
2.13 TS02plus: Why is there no P-Long (>4.0km) mode available like on the TS02?
The new electronic design does not allow distance measurements above 4 km and for most applications
ranges above 4kms are not required.
2.14

TS02plus: Are maximum ranges the same like on TS02?

For measurements to single Prism the maximum range is 3500m like with TS02.
Measurements to any surface are increased to a maximum range of 500m. With the TS02 it was only
possible to measure to 400m.
2.15

Communication Sidecover: Why is no USB stick and cable included anymore?

We received a lot of feedback, that the stick and Cable are not required. Therefore both items have been
removed.

2.16 Firmware: Can I upload the new FlexField plus Firmware onto my existing FlexLine instrument?

Yes, but keep in mind that you need a valid software maintenance contract with end date of May 1
,2012 latest.

2.17 Firmware: Is the TS09plus firmware another one as the TS02 firmware ?

No, it is the same firmware supporting black & white and colour & touch-displays.

2.18 Firmware: Why is there no "Construction" application anymore in FlexField plus (V3.x)?

The main difference between the applications "Construction" and "Reference Line" was the embedded
graphic in the Construction application. As with V. 3.0 also Reference Line has been improved by adding a
graphic, it makes no sense anymore to have both applications with very similar functionality in parallel on
the instrument.

2.19 Firmware: Is it "Viva-light" running on the TS09plus ?

No, on all FlexLine /plus total stations the "FlexField plus" firmware is installed. Even though the design of
the icons look very similar to the Viva icons, the firmware is completely different.

2.20 Firmware: What is the difference between FlexField V2.35 and FlexField plus 3.0?

There are a plenty of changes – some of them are bugfixes, but most of them are improvements. The
major ones are implementation of icons and stake out graphics, reorganization of menu entries, but also
additional functionality like the support of Helmert- & Local Resection. Further details can be found in the
official Release Notes.

2.21 Firmware: Can I upload FW 2.35 to FlexLine plus total stations?

No, this is not possible as this firmware does not support Colour & Touch Screens. FlexLine plus total
station do only support FW Version 3.0 or higher.
FAQ - FlexLine plus V.4.5.doc
st
Page 12/18