Leica HistoCore AUTOCUT Instructions For Use Manual page 42

5
Operation
6 Coarse feed button -
fast forward
7 Coarse feed button -
slow backward
8 Coarse feed button -
slow forward
9 Three-digit display
10 Green LED -
11 Green LED -
12 Green LEDs
13 CUT MODE
14 Button of setting
sectioning window
15 MEMO button
16 TRIM/SECT
17 button
BRAKE
18 Buttons
19 Yellow LED
20 Green LED
Key combination
Key combination
MENU MODE +
Switch on instrument + Minus button
Switch on instrument + Plus button
Switch on instrument + Slow backward button
Switch on instrument + Slow forward button
42
• In the trimming/sectioning mode: coarse feed forward fast;
• In the sectioning mode (Step mode activated): multiple step forward.
• In the trimming/sectioning mode: coarse feed backward slow;
• In the sectioning mode (Step mode activated): single step backward.
• In the trimming/sectioning mode: coarse feed forward slow;
• In the trimming mode (Step mode activated): single step forward.
Displays section thickness/trimming thickness and other setting
indications.
TRIM Lights up when the trimming mode is active.
Lights up when the sectioning mode is active.
SECT
Displays when an operating mode is active.
button Selects cutting mode.
Sets sectioning window. The green LED flashes until second sectioning
window edge is set.
Sets one memory position.
button Switches between the sectioning mode and the trimming mode.
Automatically activated at the end of the motorized sectioning. Can be
used to stop the motorized sectioning.
Start/stop motorized sectioning.
Lights up when the motor is switched on.
Lights up when the motor is switched off or stops at the next stop
position.
CLEAR button
Function
Set retraction value.
Deactivate STEP mode.
Activate STEP mode.
Set the coarse feed wheel direction as
counter-clockwise-forward.
Set the coarse feed wheel direction as
clockwise-forward.
Version 1.1, Revision B