Knife Holder Base And Knife Holder - Leica HistoCore AUTOCUT Instructions For Use Manual

6
Optional Accessories
1
2
4
6
Fig. 78
6.3

Knife holder base and knife holder

Fig. 79
76
7
5
3
9
1
• To mount the required insert
or (→ "Fig. 78-2")
clamping ring
and remove it.
• Place the required insert into the clamping
ring (→ "Fig. 78-4")
ring onto the thread
clockwise.
• Mount the specimen
it by turning the clamping ring
clockwise using the pin
in hole (→ "Fig.
• To orient the inserted specimen, insert the pin
(→ "Fig. 78-7")
rotate it counterclockwise to release the clamp.
You can now rotate the specimen so that the
side you want faces upwards.
8
• To lock it in the position you have chosen,
tighten the bore
pin (→ "Fig. 78-7")
The plastic handles of all clamping levers on the
instrument and knife holders can be turned to the
position that is most convenient for each user.
Pull the grip
it in this position, and rotate it to the desired
position. It will then lock automatically when
released.
(→ "Fig. 78-1")
or (→ "Fig. 78-3"), turn the
(→ "Fig. 78-4") counterclockwise
and screw the clamping
(→ "Fig. 78-5")
(→ "Fig. 78-6")
(→ "Fig. 78-4")
(→ "Fig. 78-7")
78-9").
into the bore (→ "Fig. 78-8")
(→ "Fig. 78-8") by turning the
clockwise. Remove the pin.
(→ "Fig. 79-1") out of the lever, hold
Version 1.1, Revision B
by turning it
and clamp
inserted
and