Table of Contents
Advertisement
6
Optional Accessories
Caution
After the knife/blade holder is laterally displaced, the specimen is not retracted and retrimmed.
Specimen damage.
• Retract the object head and retrim the specimen block each time after laterally displacing the
knife/blade holder.
6.4
Section waste tray
2
1
Fig. 89
6.5
Backlighting
Tips
The backlighting cannot be used with the blade holder base of the two-in-one blade holder E.
1
3
Fig. 90
82
3
5
2
Standard section waste tray and anti-static
section waste tray are available. The anti-static
section waste tray offers ease of cleaning due to
the anti-static surface.
Push the section waste tray
the front to the microtome base plate
89-2")
until it is held in place by the two magnets
(→ "Fig. 89-3")
(on the front of the microtome base
plate).
• Remove the two screws
slotted screwdriver and then remove the cover
plate
(→ "Fig.
90-2").
• Insert the backlighting
4
recess at the rear of the knife holder base.
• Connect the plug
backlighting to the socket
instrument .
(→ "Fig. 89-1")
(→ "Fig.
(→ "Fig. 90-1")
using a
(→ "Fig. 90-3")
in the
(→ "Fig. 90-4")
of the
(→ "Fig. 90-5")
Version 1.1, Revision B
from
on the
Hide quick links:
Advertisement
Table of Contents
