Table of Contents
Advertisement
6
Optional Accessories
3
16
Fig. 97
Tips
For more information on connecting and using the microscope, magnifying lens or cold-light source,
please see the appropriate Instructions for Use.
6.8
Magnifying lens, LED illumination
Tips
The magnifying lens provides a 2x magnification and can be used with all HistoCore series rotary
microtomes.
1
4
Fig. 98
• Open the screw
direction.
• Insert the silver connection piece
• The adapter
(→ "Fig. 98-2")
Power spots, 2-arms, with the adapter
Hi-Power spots, 2-arm, into the sockets
99-3"). Connect the power adapter
86
2
18
2
(→ "Fig. 98-3")
on the horizontal arm of the microscope carrier in a counterclockwise
(→ "Fig. 98-1")
allows the LED Hi-power spots to be installed. Connect the LED 1000 Hi-
(→ "Fig. 99-4")
• Attach horizontal arm. Slide the support ring
(→ "Fig. 97-15")
14
position it so that the lock nut
facing to the back. Tighten the lock nut. Slide
17
the cross-member
column. Ensure that the lock screw
97-17")
is facing to the right of the baseplate.
The horizontal arm must be centered over the
15
microscope. Slide the horizontal arm
97-3"), flat side facing the lock screw
97-17"), into the cross-member
and tighten.
as far as it will go. Tighten the screw
(→ "Fig.
99"). Insert the plugs
(→ "Fig. 99-2")
of the high-power spot controller
of the LED 1000 control unit to the high-power spot
onto the vertical column and
(→ "Fig. 97-16")
(→ "Fig. 97-14")
onto the
(→ "Fig.
(→ "Fig.
(→ "Fig.
(→ "Fig. 97-14")
3
(→ "Fig.
(→ "Fig. 99-1")
of the LED 1000
(→ "Fig.
Version 1.1, Revision B
is
98-3").
Hide quick links:
Advertisement
Table of Contents
