5
Operation
5.
Operation
5.1
Operating elements and their functions
The operating functions of the microtome are divided between a control panel and a display unit on the
microtome. A control panel on the instrument displays the current operating mode as well as various
settings. All operating functions are centrally located in the separate control panel. All buttons and
displays are logically arranged in functional groups and easily identifiable.
Warning
Improper fix to software freeze.
Specimen damage and/or delay of diagnose.
• In case of a software freeze follow the instructions given in chapters Troubleshooting and
Operation.
• If instrument cannot set back into operation immediately, make sure that the specimen is stored in
an appropriate manner to avoid any damage to it.
• If required, contact Leica Biosystems service representative.
5.1.1 Instrument control panel
1
2
3
4
Fig. 20
1
LED
RETRACT
2
Three-digit display
3
Four-digit display
4
MENUMODE
40
12
Lights up during specimen retraction.
Displays section thickness/trimming thickness and other setting
indications.
Displays the section counter number.
button
Changes between section thickness sum and section counter.
5
6
7
8
9
10
11
Version 1.1, Revision B