Leica HistoCore AUTOCUT Instructions For Use Manual page 24

2
Safety
Fig. 7
3
Fig. 8
Tip
The clamping levers on the two-in-one blade holder E are not interchangeable. The two clamping
levers (→ "Fig. 8-2") (→ "Fig. 8-3")
malfunctions of the two-in-one blade holder E can occur. The clamping lever for the blade
8-2") is at the right side, the clamping lever for the lateral displacement
24
1
1
2
must remain in the position shown at all times, as otherwise isolated
Knife holder E-TC
The safety guard on knife holder E-TC consists
of a foldaway handle (→ "Fig.
the cutting edge, fold the safety guard handle
upwards.
Two-in-one blade holder E for high and low
profile blades
The safety guard on the two-in-one blade holder
E consists of a red foldaway handle
To cover the cutting edge, fold the safety guard
handle upwards as illustrated in
(→ "Fig. 8-3")
7-1"). To cover
(→ "Fig. 8-1").
(→ "Fig. 8").
(→ "Fig.
is at left side.
Version 1.1, Revision B