Table of Contents
Advertisement
6
Optional Accessories
Tips
If the fine-directional fixture for specimen clamps is not used, retain the baseplate
4 screws
(→ "Fig. 70-3")
6.1.4 Quick clamping system
2
Fig. 71
6.2
Specimen clamps and holders
Tips
All specimen clamps available as accessories can be integrated into the fine directional, or
directional, or non-directional specimen holder fixtures. For how to install the specimen clamps and
holders to the quick clamping system, please refer to
70
together with the fine-directional fixture for specimen clamps.
1
1
It is used as an adaptor for use with the fine-
directional fixture for specimen clamps with
zero point indicators or the directional fixture for
specimen clamps.
Screw the 4 screws
(→ "Fig. 71-2")
(→ "Fig. 71-1")
with an Allen key size 2.5 and
tighten them.
(→ P. 57 – 5.3 Adjusting the clearance
(→ "Fig. 70-1")
and
into bore
angle).
Version 1.1, Revision B
Hide quick links:
Advertisement
Table of Contents
