Mounting The Sample - NT-MDT NTEGRA Spectra Instruction Manual

8.3. Mounting the Sample

To mount the sample, perform the following steps:
1. Dislocate the lens down by rotating the manual approach knob clockwise (see pos. 2 in
Fig. 2-3).
2. Prepare the sample for measurement by placing it on a glass substrate and fixing this
assembly, if necessary.

ATTENTION! The substrate to mount the sample should be transparent.
Thickness of the substrate may not exceed the working distance of the lens.
3. Place the substrate on the sample stage 1 of the exchangeable mount (Fig. 8-1).
4. Fasten the substrate with spring clips 2.
Fig. 8-1. Sample on the sample stage
1 – sample stage; 2 – spring clips
Chapter 8. Preparing for Operation
31