Table of Contents
Advertisement
the
tab, define the final CCD-matrix temperature to be 20 °C and wait until
Andor CCD
the matrix reaches the prescribed temperature.
ATTENTION! Do not close the Control program if temperature of the
CCD-matrix is lower 0 С.
2. Retract the lens from the sample.
3. Switch off laser off by turning the key of the laser power supply to the
4. Switch off the controllers SPM.
5. Switch off the spectrometer.
6. Close the Control program.
Chapter 7. Setup and Installation
position.
OFF
29
- Quick Links:
- Design
- Ntegra Base Unit
- Basic Safety Measures
- Scanning
- Afm Measurements
Hide quick links:
Advertisement
Table of Contents
