NT-MDT NTEGRA Spectra Instruction Manual page 47

acquisition with the Andor and Renishaw cameras are explained in sec.
and in sec. 9.3.2 on p. 37, respectively).
Fig. 9-30. Peaked regions are selected in the spectrum
The highlighted regions will be displayed in the
4. For every selected region, define functions to apply for processing spectral data in the
course of scanning. To this purpose, select the desired options in the
(Fig. 9-32).
5. To record the full spectrum at every scan point, press the
button. If the
Save Full Spectrum separately
in a separate file that is located at the indicated path (Fig. 9-33). Otherwise, the data are
appended to the
Data
Chapter 9. Measuring with the Confocal Microscopy Mode
Fig. 9-31. Table of highlighted regions
Functions
Fig. 9-32.
tab as a separate frame.
table (Fig. 9-31).
Regions
panel
Full Spectrum Recording
option is selected, the data will be saved
9.3.1 on p. 34
panel
Functions
47