Measuring Heads - NT-MDT NTEGRA Spectra Instruction Manual

NTEGRA Spectra Probe NanoLaboratory. (Inverted Configuration with Renishaw Spectrometer).
Exchangeable mount technical specifications:
Measuring head travel, XY
XY positioning device travel
XY positioning device translation resolution
Scanning range, XY
Lens focus range, Z piezo drive

NOTE. XY scanning range of the scanning optical mount can be 50
depending on the delivery set.

2.1.4. Measuring Heads

Scanning probe measuring heads available in NTEGRA Spectra PNL extend performance
of the device. They facilitate investigations with techniques quite distinct from the
confocal measurements. For example, topography of the sample surface with atomic
resolution can be acquired. For details on measurements with SNOM and AFM measuring
heads, refer to PNL NTEGRA Solaris and PNL NTEGRA. Performing Measurements.
SNOM Measuring Head
The SNOM measuring head (Fig. 2-6) is used both for measurements of surface
topography of the sample and for measurements of its near-surface optical properties.
Detection of probe oscillation amplitude and phase is also available for those modes.
12
55 mm
55 mm
5 µm
100100 µm
50 µm

50 µm