NT-MDT NTEGRA Spectra Instruction Manual page 42

NTEGRA Spectra Probe NanoLaboratory. (Inverted Configuration with Renishaw Spectrometer).
4. Select the
Point Number
over scan axes X and Y (Fig. 9-20).
Fig. 9-20. Defining numbers of scan points for every direction
5. Set limits of the scanning area to their maxima:
a. Click the
the area of scanning.
b. Set limits of the scanning area to their maxima with the mouse.
6. Place the tip in the center of the scanning area:
a. Activate the function of the tip displacement by clicking the button
bar.
b. Place the tip in the center of the scanning area with the mouse.
42
Fig. 9-19. Scanning direction
item in the drop-down list and enter numbers of scan points
button on the Toolbar (Fig. 9-21) to enable the function of selecting
Fig. 9-21. 2D Scanning Data View Panel
X Y
in the tool