NT-MDT NTEGRA Spectra Instruction Manual page 48

NTEGRA Spectra Probe NanoLaboratory. (Inverted Configuration with Renishaw Spectrometer).
6. Go to the
Scan(Master)
of the tab.
Spectra
7. Choose a signal for registration:
a. Open the
Select Signal
Control panel of the
b. Select the
CCD
Fig. 9-35. Selecting the
c. Click the
8. In the field
Time/point
probe to pass from a scan point to the next one when moving to the start point of the
line.
9. Click the

ATTENTION! Do not open any other tab of the program until scanning
completes because they may interfere with the running process.
48
Fig. 9-33
tab (Fig. 9-34) by clicking the corresponding title at the left top
Fig. 9-34. Control panel of the
window (Fig. 9-35) with the
tab.
Scan(Master)
option in the
Select Signal
CCD
signal in the
button to enable the modifications and to close the window.
in the Control panel of the
button to start scanning (Fig. 9-34).
Scan
tab
window.
Select Signal
window
tab, define time for the
Scan(Master)
button in the