Ntegra Base Unit - NT-MDT NTEGRA Spectra Instruction Manual

The microscope is equipped with an optical system that provides the following options for
NTEGRA Spectra:
− delivering laser beam to the sample;
− delivering the light reflected from the sample to the spectrometer;
− monitoring the process of approaching the lens to the sample;
− displaying the sample image taken from the video camera of the microscope.

2.1.2. NTEGRA Base Unit

The base unit of NTEGRA (Fig. 2-3) is the base platform for mounting the exchangeable
mount and the protective hood.
The base unit includes the approach system that is used to approach the lens to the sample.
For manual operation, the manual approach knob 2 is used.
Data on ambient temperature and humidity are measured with the sensor 3 and then
displayed by the LC-display 4.
Base unit electrical slots
Slots for connecting the devices installed on the base unit:
– two identical connectors for connecting the measuring head;
HEAD
– scanner connector, used for connecting either the exchangeable
SCANNER
scanner or the measuring head scanner;
Fig. 2-3. Main components of the base unit
1 – approach lever; 2 – manual approach knob;
3 – temperature and humidity sensor; 4 – LC-display
Chapter 2. Design
9