NT-MDT NTEGRA Spectra Instruction Manual page 38

NTEGRA Spectra Probe NanoLaboratory. (Inverted Configuration with Renishaw Spectrometer).
Fig. 9-12.
b. Go to the
Acquisition
c. Enter the exposure time in the range of 0.3÷1 s in the
d. Define number of measurements at every scan point in the
field.
e. Click the
OK
window.
setup
6. Select the desired laser power in the
7. Open the laser shutter by selecting the
(Fig. 9-11).
8. Collect the spectrum by clicking the
Fig. 9-13. Spectrum collected from the whole CCD-matrix

NOTE. To activate the option of scan-time updating of the spectrum image, click
the

NOTE. A spectrum to be saved should be appended to the current data file as a
separate frame using the
38
Acquisition
tab of the
tab by clicking the corresponding title.
button to save modifications and to close the
Laser power
button.
Toolbar button.
Spectral acquisition setup
Exposure time
drop-down list (Fig. 9-11).
option in the
Opened
button (Fig. 9-13).
window
input field.
input
Accumulations
Spectral acquisition
panel
Shutter state