Example 1 With Com-Profibus V3.3; Example For A Positioner - Burkert 8630 Operating Instructions Manual

P DP
ROFIBUS
Example 1 with COM Profibus V3.3

Example for a positioner

Settings in the configuration menu of the TOP Control Continuous:
ADDR: 3
After starting COM Profibus and the setting of master and SPS information, one gets the following
screen:
The following screen appears:
• Select Type 8630
128 - 8630
PDI:
• PDI:POS
• PDI:MODE
• Select CONTROLLER family
• Select Configuration ...
PDO:
• PDO:INP
• PDO:MODE
• Select CONTROLLER
• Set an element under the
• Set the 3rd address in the
• Confirm with OK
control
menu address (without
image)