Supplementary Functions - Burkert 8630 Operating Instructions Manual

O
PERATION AND CONTROLLER FUNCTIONS

Supplementary Functions

ADDFUNCT
62 - 8630
Select the transfer characteristic between input
CHARACT
signal ans stroke (correction characteristic)
Tight closure function for positioners or
CUTOFF
process controllers (if activated)
DIR.CMD
Sense of action between input signal ans setpoint
position
DIR.ACT
Allocation of state of pressurization of actuator
chamber (Port 2
SPLTRNG
Signal range splitting; input signal in % for which the
valvetransverses the entire stroke
X.LIMIT
Limitation of mechanical stroke range
X.TIME
Limitation of correcting speed
X.CONTRL
Parametrization of positioner
(Parametrization of the PID process controller).
P.CONTRL
Without function in the version as positioner!
CODE
Code protection for settings
Enter safety position
SAFEPOS
SIG-ERR
Configure error recognition signal level
Activation of binary input
BIN-IN
(Configuration of the outputs, only with supplementary
OUTPUT
board for analog feedback or binary outputs)
CAL USER
Calibration
Reset to factory settings
SETFACT
Configuration of the serial interface
SER-I/O
ENDFUNCT
) to actual position
1