Technical Data; Safety Settings On Bus Failure - Burkert 8630 Operating Instructions Manual

Technical data

EDS file
Icons
Baud rate
Adress
Process data
Total line length according to DeviceNet specification
(Total line length = sum of all mein and drop lines)
Baud rate
125 kBaud
250 kBaud
500 kBaud
Drop line length (Drop Lines)
Baud rate
125 kBaud
250 kBaud
500 kBaud

Safety settings on bus failure

The actuator moves to the position corresponding to the setpoint last transmitted (default setting).
For other setting options (see the chapter Settings on the TOP Control Continuous)
BUER8630.EDS
BUER8630.ICO
125 kBit/s, 250 kBit/s, 500 kBit/s (adjustable via keys at the device or via
network);
Factory setting 125 kBit/s
0 ... 63; (adjustable via keys at the device or via network);
Factory setting 63
7 static Input Assemblies
(Input: from TOP Control Continuous to DeviceNet Master/Scanner)
4 static Output Assemblies
Maximum total line length
Thick Cable
500 m
250 m
100 m
Maximum length
6 m for all baud rates
Thin Cable
100 m for all baud rates
Length of drop lines
Maximum total length of drop lines in network
156 m
D
EVICE
78 m
39 m
8630 - 135
N
ET