Settings In The Menu Items - Burkert 8630 Operating Instructions Manual

F C
IRST OMMISSIONING

Settings in the menu items

ACTFUNC
INPUT
ADDFUNCT
X.TUNE
END XX
Entering the position setpoint in the AUTOMATIC mode
After selection of the basic settings and return to the AUTOMATIC mode, the TOP Control Continuous
works as a positioner.
Enter the position setpoint via the signal.
Switching between the
display options:
Display:
• Actual position of valve actuator
• Setpoint position of valve actuator
• Input signal for setpoint position
(here identical to setpoint position)
• Temperature inside
TOP Control Continuous housing
38 - 8630
Actuator function
FUNC SNGL - single-acting
FUNC DOUB - double-acting
Standard signal
INP 4'20A - Current 4 ... 20 mA
INP 0'20A - Current 0 ... 20 mA
INP 0'10V - Voltage 0 ... 10 V
INP 0'5V - Voltage 0 ... 5 V
Jump over
Initiate self-parametrization
Return to AUTOMATIC mode ;
the display EEPROM appears until the settings have been in the
memory.
POS__XXX (0 ... 100 %)
CMD__XXX (0 ... 100 %)
INP__XXX
(0 ... 5/10 V or 0/4 ... 20 mA)
TEMP_XX.X (in °C)