JLG 3507 Supplemental Repair Manual page 91

DISASSEMBLY
10
9
FIGURE 6: Remove the braking disks (9) and the whole piston
(10).
For details, see CHECKING WEAR AND REPLACING THE
BRAKING DISCS p. 19.
10
11
FIGURE 7: If pins (11) need replacing, block the piston (10)
into a vice whose jaws are covered in smooth material and re-
move the pins.
8
12 13
14
FIGURE 8: If thrust levers (12) and (13) need replacing, remo-
ve the U-joint (14) before removing the arms (8).
For details, see DOUBLE U-JOINT p. 29.
ASM-0025E - 212 Axle Service Manual Dana Holding Corporation 89