Table of Contents
Advertisement
9
FIGURE 6: Remove parts in the following sequence: nut (9),
o-ring (11), flange (10) and stop ring (7).
12
FIGURE 7: Remove the seal (12) and discard it.
NOTE:
Write down assembly direction.
14
FIGURE 8: Remove the securing screws (13) from brake sup-
port (14).
ASM-0025E - 212 Axle Service Manual
10
11
12
13
14
FIGURE 9: Remove brake support (14).
15
FIGURE 10: Remove the spacer (15).
NOTE:
If operations are to be carried out the bevel pinion, see
the specific axle section.
DISASSEMBLY
16
Dana Holding Corporation
105
Advertisement
Table of Contents
