Table of Contents
Advertisement
A
FIGURE 39: 2-FUNCTION VERSION ONLY
Fit the separating ring (10) of Belleville washers onto the cover
(8), measure size "B" and note it down.
Measure size "A" which you will need for calculating the
shims (9) according to the following:
S=A±(B+18.4) where: S=Shim thickness - 18.4 mm=fixed
measure of Belleville washers.
FIGURE 40: Lightly lubricate the shims (9) required according
to calculations and the separating ring (10) of the Belleville
washers. Fit shims and ring on the cover (8).
NOTE:
Position the larger shim so that it leans against the cover.
40
FIGURE 41: Check the state of the o-ring (40).
Lubricate sealing ring (38) and fit flange (5) into the cover (8).
ASM-0025E - 212 Axle Service Manual
10
B
10
9
8
38
8
5
11
10
9
FIGURE 42: Fit the Belleville washers (11) onto the cover (8),
thoroughly checking washers orientation.
8
40
FIGURE 43: Lubricate the o-ring (40) and install the cover as-
sembly (8).
6 7
FIGURE 44: Install screws (6) and washers (7). Lock the cover
with a torque wrench setting of 116 - 128 N·m.
NOTE:
Tighten in an alternate and criss-cross method.
ASSEMBLY
11
8
8
Dana Holding Corporation
119
Advertisement
Table of Contents
