Table of Contents
Advertisement
FIGURE 27: Connect an external pump to the negative brake
and introduce pressure to 15 - 30 bar.
19
FIGURE 28: Insert the stroke automatic regulation springs
(19); place them in line with the piston (11).
FIGURE 29: Insert the intermediate disk (11).
ASM-0025E - 212 Axle Service Manual
FIGURE 30: Fit the reversal springs (12)(13) on the piston (11).
10 - 15 N·m
11
FIGURE 31: Apply LOCTITE 270 to the thread of the pistion
adjustment nut.
Tighten with torque wrench setting of 10 - 15 N·m
11
FIGURE 32: Y=brake gap
0,75mm 1,00mm
Depending on axle configuration.
11
Y 18
1,25mm
1,50mm
Dana Holding Corporation
ASSEMBLY
12
13
157
Advertisement
Table of Contents
