Table of Contents
Advertisement
DISASSEMBLY
NOTE:
The o-rings must be replaced each time the unit is disas-
sembled.
FIGURE 12: Write down their order of assembly and mark
and remove negative piston sign the position.
3
FIGURE 13: Slowly introduce low-pressure compressed air
through the connection member for the negative brake, in or-
der to extract the piston (3).
CAUTION
Hold the piston (3) back, as it may be suddenly ejected and
damaged.
154
Dana Holding Corporation
15
FIGURE 14: Remove brake discs (14) and (15), writing down
direction of assembly.
NOTE:
If disks are not to be replaced, avoid changing their position.
24
FIGURE 15: Remove braking discs (16) and shims (24), wri-
ting down direction of assembly.
NOTE:
If disks are not to be replaced, avoid changing their posi-
tion.
ASM-0025E - 212 Axle Service Manual
14
16
Advertisement
Table of Contents
