Table of Contents
Advertisement
14
FIGURE 7: Remove screws (14) and remove the intermediate
cover (13).
NOTE:
Support the differential unit with a lever.
5
15
FIGURE 8: Disconnect selector (5) from piston (6). While hol-
ding the selector up, remove the differential unit (15).
FIGURE 9: Extract selector fork (5).
ASM-0025E - 212 Axle Service Manual
13
5
12
FIGURE 10: Remove snap ring (12) and whole piston (6).
FIGURE 11: Remove guide ring (11) and o-ring (10).
NOTE:
The guide ring (11) and o-ring (10) must be replaced each
time the unit is disassembled.
9
FIGURE 12: Remove snap ring (9) and take piston unit (6)
apart. Remove all component parts.
DISASSEMBLY
6
11
10
6
7
8
9
Dana Holding Corporation
145
Advertisement
Table of Contents
