JLG 3507 Supplemental Repair Manual page 165

9
7
FIGURE 7: Remove check screws (7), (8) and relative wa-
shers (10) from cover (9).
9
FIGURE 8: In turn, insert a punch in the slots provided and,
tapping lightly with a hammer, separate the cover (9) from the
body of the reduction gear (11).
9
FIGURE 9: Insert two levers in the provided slots and move
the cover (9) away from the body of the reduction gear (11).
ASM-0025E - 212 Axle Service Manual
10
8
11
11
FIGURE 10: Lightly tap with a hammer to disengage cover (9)
from upper gear (12).
9
FIGURE 11: Draw out cover (9) and remove any sealant left.
FIGURE 12: Remove lower gear (13).
DISASSEMBLY
9
12
13
Dana Holding Corporation 163