Table of Contents
Advertisement
CAUTION
Hold piston (12) as it may be rapidly ejected and damaged.
17
18
FIGURE 7: Remove check screws (17) from cylinder (18).
FIGURE 8: Remove cylinder (18) complete with guide pin (19)
of piston (12).
NOTE:
Take note of direction of assembly.
FIGURE 9: With the help of a lever, pry off the cover (23) com-
plete with o-ring (24).
ASM-0025E - 212 Axle Service Manual
17
18
19
23
24
NOTE:
Thoroughly clean the face of bevel pinion support where
the hub rests, check the o-ring (24) and replace it if ne-
cessary.
25 26
FIGURE 10: Remove friction discs (25), (26) and hub (27).
28 29
30
FIGURE 11: 3-FUNCTION VERSION ONLY
Loosen nuts (28) and unscrew studs (29) to retract the
adjustment points (30).
ONLY IF NECESSARY. Remove points (30).
NOTE:
Loosen studs (29) in an alternate manner until the piston
comes to end of backstroke.
DISASSEMBLY
27
28 29
Dana Holding Corporation
113
Advertisement
Table of Contents
