JLG 3507 Supplemental Repair Manual page 160

ASSEMBLY
FIGURE 33: Fit the pin screws making sure that they are all
of the same color.
Apply Loctite 270 to the thread.
Torque wrench setting: 5 - 7 N·m.
FIGURE 34: Take the measurement from the surface of the
intermediate disk to the cover sealing surface with 30 bar of
pressure introduced.
EXAMPLE: 25.4 mm
FIGURE 35: Put the brake disc pack including the shim under
a press, load with 1000 kg and take the measure "V".
EXAMPLE: V = 40 mm
158 Dana Holding Corporation
5 - 7 N·m
FIGURE 36: Arm fix quote = 68 mm
S
FIGURE 37: S = 68 mm - ( x + y + v ) = Thickness of shims to
insert under the shim washer.
24
S 24
ASM-0025E - 212 Axle Service Manual