Table of Contents
Advertisement
FIGURE 41: CONVERGENCY ADJUSTMENT ON UNITS
WITH COLLAR
Loosen the nuts on the collars (12).
16
FIGURE 42: Rotate the ball-and-socket joints (16) until con-
vergency has been obtained.
Check that articulations move easily and lock the collars (12).
Torque wrench setting for nuts: 42 - 52 N·m
FIGURE 43: CONVERGENCY ADJUSTMENT ON ALTERNA-
TIVE VERSIONS
Loosen the nuts (11) and screw them onto the ball-and-so-
cket joints (15).
ASM-0025E - 212 Axle Service Manual
12
15
11
FIGURE 44: Hold the articulations still and rotate the ball-
and-socket joints (15).
Once the convergency has been adjusted, lock the nuts (11).
Torque wrench setting for nuts: 298 - 328 N·m
ASSEMBLY
15
11
Dana Holding Corporation
57
Advertisement
Table of Contents
