Table of Contents
Advertisement
2
10
FIGURE 36: With the help of tool T5 (See drawing T5 p. 46)
insert the planetary wheel gears (10) into the cover (2).
Accurately check the orientation.
10
FIGURE 37: Lock the gears (10) into position by fitting the
snap rings (9).
FIGURE 38: Fit the planetary carrier cover (2) onto the hub (3).
CAUTION
Check that the o-ring (20) is in good condition and in posi-
tion.
ASM-0025E - 212 Axle Service Manual
T5
T11
9
20
3
2
1
2
FIGURE 39: Lock the planetary carrier cover (2) by tightening
the screws (1).
Torque wrench setting for screws: 40 - 50 N·m
FIGURE 40: Connect the steering bars.
For details, see COMPLETE STEERING CASE p. 25.
ASSEMBLY
1
Dana Holding Corporation
43
Advertisement
Table of Contents
