Q173Dpx Manual Pulse Generator Interface Module - Mitsubishi Electric Q170MSCPU User Manual

2 SYSTEM CONFIGURATION

2.5.5 Q173DPX Manual pulse generator interface module

Q173DPX receives signals required for Manual pulse and Incremental synchronous
encoder (Voltage-output/Open-collector type/Differential-output type) input.
(1) Q173DPX name of parts
5)
6)
7)
4)
No.
Name
1) Module fixing hook
2) Input indicator LED
3) PULSER connector
4) Module mounting lever
5) Module fixing screw hole
Hook used to fix the module to the base unit.
(Single-motion installation)
Display the input status from the external equipment.
LED
Display for input signal status of manual
PLS.A 1 to 3
pulse generator/incremental synchronous
PLS.B 1 to 3
encoder phases A, B
Display for signal status of tracking
TREN 1 to 3
enable
The manual pulse generator/incremental synchronous
encoder phases A, B and tracking enable signal does not
turn ON without setting Q173DPX in the system setting.
Input connector of the Manual pulse generator/Incremental
synchronous encoder.
Used to install the module to the base unit.
Hole for the screw used to fix to the base unit
(M3 12 screw : Purchase from another supplier)
2 - 59
Q173DPX
PLS.A PLS.B TREN
1 1 1
2 2 2
3 3 3
PULSER
Q173DPX
Application
Details
1)
2)
3)
8)