Appendix 1.3 Differences Between Cpu Display And I/O Assignment - Mitsubishi Electric Q170MSCPU User Manual

Melsec q series, motion controller
Table of Contents

Advertisement

APPENDICES

APPENDIX 1.3 Differences between CPU display and I/O assignment

Table 1.3 Differences between CPU display and I/O assignment
Item
CPU display
Base mode
(Auto)
I/O assignment
setting
Base mode
(Detail)
Q170MSCPU
• Motion CPU area : Q170MSCPU-PCPU
• PLC CPU area
: Q03UDCPU (Q170MSCPU use)
Q06UDHCPU (Q170MSCPU-S1
use)
• The main base of eight slots corresponding is built
into the Q170MSCPU.
• 16 points are set to each empty slot.
• First address of the extension base is "70".
• I/O assignment points are individually assigned.
When the first address of the extension base is set
to address "0", the setting is as follows.
• Main base: 8 slots
• Number of points of each empty slot: 0 point
The CPU display and setting of I/O assignment are shown below.
(1) CPU display
Confirm the CPU display of the PLC CPU area and Motion CPU area on the
System Monitor screen displayed on [Diagnostics] – [System monitor] of
GX Works2.
PLC CPU area is displayed as " Q03UDCPU (Q170MSCPU use)/Q06UDHCPU
(Q170MSCPU-S1 use)", and Motion CPU area is displayed as "Q170MSCPU-
PCPU".
• Motion CPU : Q173DSCPU, Q172DSCPU
• PLC CPU
• The main base and extension base are
automatically determined.
• I/O or empty slot, etc. is automatic determined,
and the points are assigned.
• I/O assignment points are individually assigned.
APP - 4
Q173DSCPU/Q172DSCPU
: Q06UDHCPU, etc.
PLC CPU area
(Q03UDCPU/
Q06UDHCPU)
Motion CPU area
(Q170MSCPU-PCPU)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Q170mscpu-s1

Table of Contents