Q173Px Manual Pulse Generator Interface Module - Mitsubishi Electric Q173CPU User Manual

2 SYSTEM CONFIGURATION

2.4.6 Q173PX Manual pulse generator interface module

Q173PX receive external signals required for Manual pulse generator and Incremental
synchronous encoder (Voltage-output/Open collector type/Differential-output type).
(1) Q173PX/Q173PX-S1 name of parts
5)
6)
7)
No.
Name
1) Module fixing hook
2) Mode judging LED
3) PULSER connector
4) Module loading lever
Module fixing screw
5)
hole
Hook used to fix the module to the base unit.
(Quick release installation)
Display the input status from the external equipment.
LED
Input signal status of the Manual pulse
PLS.A 1 to 3
generator/Incremental synchronous
PLS.B 1 to 3
encoder phases A and B
TREN 1 to 3 Tracking enable signal
This LED is not turned on if it is not set the Q173PX in
the system settings.
Input connector of the Manual pulse generator/Incremental
synchronous encoder.
Used to load the module to the base unit.
Hole for the screw used to fix to the base unit
(M3×12 screw : Purchase from the other supplier)
2 - 61
Q173PX-S1
PLS.A PLS.B TREN
1 1 1
2 2 2
3 3 3
PULSER
Q173PX
Application
Details
1)
2)
3)
4)