Mitsubishi Electric Q170MSCPU User Manual page 79

2 SYSTEM CONFIGURATION
No. Name
AC input
power supply
POWER
1)
LED
DC input
power supply
ERR terminals
2)
3) FG terminal
4) LG terminal
5) Power input terminals
+24V, 24G terminals
6)
(Q62P only)
7) Terminal screw
8) Terminal cover
9) Module fixing screw hole
10) Module mounting lever
(2) Names of Parts and Setting
This section describes the names of the parts of each power module.
• Q61P (100 to 240VAC input, 5VDC 6A output)
• Q62P (100 to 240VAC input, 5VDC 3A/24VDC 0.6A output)
• Q63P (24VDC input, 5VDC 6A output)
• Q64PN (100 to 240VAC input, 5VDC 8.5A output)
ON (green) : Normal (5VDC output, momentary power failure within 20ms)
OFF : • AC power supply is ON, however, the power supply module is out of order.
(5VDC error, overload, internal circuit failure, blown fuse)
• AC power supply is not ON
• Power failure (including an momentary power failure of more than 20ms)
ON (green) : Normal (5VDC output, momentary power failure within 10ms)
OFF : • DC power supply is ON, however, the power supply module is out of order.
(5VDC error, overload, internal circuit failure, blown fuse)
• DC power supply is not ON
• Power failure (including an momentary power failure of more than 10ms)
Normally OFF when loaded in an extension base unit.
Ground terminal connected to the shield pattern of the printed circuit board.
Grounding for the power supply filter. The potential of Q61P, Q62P, and Q64PN terminal
is 1/2 of the input voltage.
• Power input terminals connected to a power supply of 100VAC to 200VAC.
(Q61P, Q62P, Q64PN)
• Power input terminals connected to a power supply of 24VDC. (Q63P)
Used to supply 24VDC power to inside the output module. (using external wiring)
M3.5 7 screw
Protective cover of the terminal block
Used to fix the module to the base unit.
M3 12 screw (user-prepared) (Tightening torque : 0.36 to 0.48 N•m)
Used to load the module into the base unit.
9)
Q62P
INPUT
100-240VAC
50/60Hz 105VA
OUTPUT 5VDC 3A/24VDC 0.6A
ERR.
6)
+24V
L
+ -
24G
24VDC
(Q62P only)
0.5A
(FG)
(LG)
N
INPUT
100-240VAC
L
Q62P
10)
Application
2 - 48
1)
PO W ER
8)
2)
3)
4)
5)
7)