Appendix 2.1 Sample Data - Mitsubishi Electric Q170MSCPU User Manual

APPENDICES

APPENDIX 2.1 Sample data

CPU area Item
Base setting
Motion CPU
area
Multiple CPU
setting
I/O
assignment
PLC CPU PLC system
area
Multiple CPU
settings
Device
comment
An easy setting can be achieved for the parameter setting such as the automatic
refresh setting of Multiple CPU setting and I/O assignment setting by using the sample
data.
Creation of project using the sample data is suitable for the machine control in the
sequence program.
The sample data have two types (Motion CPU area, PLC CPU area).
(1) Overview
(a) Multiple CPU setting
An easy setting can be achieved for the automatic refresh setting of
positioning dedicated signal between the PLC CPU area and Motion CPU
area.
(b) I/O assignment setting
The main base of eight slots or equivalent is built into the Q170MSCPU.
All points of "empty slot" not used on the main base are set to "0" point by
the sample data.
(c) Device comment
The name of positioning dedicated signal can be used as the device
comment of the sequence program.
(2) How to use
The following methods to use the sample data are shown below.
• Divert the sample data.
• Overwrite the sample data to the created project.
(3) Setting description
Outline of overwrite sample data is shown table below.
Add the extension base units and each module according to the system.
Refer to this section (7) for details of the sample data.
Description
• Extension base
Stage1 to Stage 7
• Multiple CPU high speed transmission
area setting
• Automatic refresh setting of CPU No.1, 2
• Base setting
No. of slots for the base unit used
• I/O assignment
Unit types, I/O points, I/O number
• Base mode setting
Points occupied by empty slot
• No. of PLC
• Multiple CPU high speed transmission
area setting
• Auto refresh setting of CPU No.1, 2
Set the name of positioning dedicated signal
to the comment of device.
Programming
software package
MT Developer2
GX Works2
(Note-1): Project for virtual mode switching method.
(Note-2): Project for advanced synchronous control method.
APP - 10
Project name
SV13: Q170MS_SV13_MT2
SV22: Q170MS_SV22_MT2
Q170MS_SV22_AD_MT2
SV13: Q170MS_SV13_GX2
SV22: Q170MS_SV22_GX2
Q170MS_SV22_AD_GX2
(Note-1)
(Note-2)
(Note-1)
(Note-2)