Power Supply Module - Mitsubishi Electric Q170MSCPU User Manual

2 SYSTEM CONFIGURATION

2.5.2 Power supply module

Item
Base loading position
Applicable base unit
Input power supply
Input frequency
Input voltage distortion factor
Max. input apparent power
Inrush current
5VDC
Rated output
current
24VDC
External output voltage
5VDC
Overcurrent
(Note-1)
protection
24VDC
Overvoltage
5VDC
(Note-2)
protection
Efficiency
Allowable momentary power
(Note-3)
failure time
Dielectric withstand voltage
Insulation resistance
Noise immunity
Operation indicator
Fuse
Application
Rated switching
voltage/current
Minimum switching
Contact
load
output
Response time
section
Life time
Surge suppressor
Fuse
Terminal screw size
(1) Power supply module specifications
Q61P
Q35DB, Q38DB, Q312DB, Q63B, Q65B, Q68B, Q612B
100 to 240VAC (+10%/-15%)
(85 to 264VAC)
50/60Hz ±5%
5% or less
130VA
20A 8ms or less
6A
——
——
6.6A or more
——
70% or more
20ms or less
Across inputs/LG and outputs/FG
2,830VAC rms/3 cycles (Altitude: 2000m
(6561.68ft.) )
Across inputs and outputs (LG and FG
separated), across inputs and LG/FG, across
outputs and LG/FG 10M or more by insulation
resistance tester (500VDC)
• By noise simulator of 1,500Vp-p noise voltage,
1 µ s noise width and 25 to 60Hz noise
frequency
• Noise voltage IEC61000-4-4, 2kV
Electrical: 100 thousand times at rated switching voltage/current or more
Q62P
Q series power supply module loading slot
24VDC (+30%/-35%)
(15.6 to 31.2VDC)
105VA
100A 1ms or less
(Note-4)
(at 24VDC input)
3A
0.6A
24VDC±10%
3.3A or more
0.66A or more
5.5 to 6.5V
65% or more
(at 24VDC input)
500VAC across
primary and 5VDC
10M or more by
insulation resistance
• By noise simulator of
500Vp-p noise
voltage, 1 µ s noise
width and 25 to 60Hz
noise frequency
LED indication (Normal: ON (Green), Error: OFF)
Built-in (Unchangeable by user)
ERR contact
24VDC, 0.5A
5VDC, 1mA
OFF to ON: 10ms or less. ON to OFF: 12ms or less.
Mechanical: 20 million times or more
None
None
M3.5 screw
2 - 45
Q63P
100 to 240VAC (+10%/-15%)
(85 to 264VAC)
——
——
45W
20A 8ms or less
6A
——
——
6.6A or more
——
70% or more
10ms or less
Across inputs/LG and
2,830VAC rms/3 cycles
(Altitude: 2000m (6561.68ft.))
Across inputs and outputs (LG
and FG separated), across
inputs and LG/FG, across
outputs and LG/FG 10M or
tester
more by insulation resistance
tester (500VDC)
• By noise simulator of
1,500Vp-p noise voltage,
1 µ s noise width and 25 to
60Hz noise frequency
• Noise voltage IEC61000-4-4,
2kV
Q64PN
50/60Hz ±5%
5% or less
160VA
(Note-4)
8.5A
9.9A or more
20ms or less
outputs/FG