Mitsubishi Electric Q170MSCPU User Manual page 224

APPENDICES
Start-up MT Developer2.
Open a project of sample data.
Save projects under the specified
name.
Start-up GX Works2.
Open a project of sample data.
Save projects under the specified
name.
(4) Precautions
(a) By using the sample data, the positioning dedicated signals of the Motion
CPU area are changed to the device value of PLC CPU area by the
automatic refresh. It needs to set again the automatic refresh setting after
rewriting the sample data to transmit the data to the positioning dedicated
signal using the Motion SFC program.
(b) The existing data is overwritten and erased by diverting the sample data to
the created project.
(c) The project PLC type used in the PLC CPU area is "Q03UD".
When using sample data for Q170MSCPU-S1, the PLC type needs to be
changed to "Q06UDH" in the change PLC type of GX Works2.
(d) Sample data is only for workspace format project. There is no single file
format project.
(5) Procedure for project creation
(a) When the sample data is diverted.
1) Motion CPU area
START
END
2) PLC CPU area
START
END
Sample data
(1) Save folder
64-bit version operating system:
C:\Program Files (x86)\MELSOFT\MTD2\Lang\en-US\SampleData\MT2
32-bit version operating system:
C:\Program Files\MELSOFT\MTD2\Lang\en-US\SampleData\MT2
(2) Project name
SV13: Q170MS_SV13_MT2
SV22: Q170MS_SV22_MT2
Q170MS_SV22_AD_MT2
(Note-1): Project for virtual mode switching method.
(Note-2): Project for advanced synchronous control method.
Sample data
(1) Save folder
64-bit version operating system:
C:\Program Files (x86)\MELSOFT\MTD2\Lang\en-US\SampleData\GX2
32-bit version operating system:
C:\Program Files\MELSOFT\MTD2\Lang\en-US\SampleData\GX2
(2) Project name
SV13: Q170MS_SV13_GX2
SV22: Q170MS_SV22_GX2
Q170MS_SV22_AD_GX2
(Note-1): Project for virtual mode switching method.
(Note-2): Project for advanced synchronous control method.
APP - 11
(Note-1)
(Note-2)
(Note-1)
(Note-2)