Sscnet Cables - Mitsubishi Electric Q170MSCPU User Manual

2 SYSTEM CONFIGURATION
2.5.7 SSCNET cables
Between the Motion controller and servo amplifiers, or servo amplifier and servo
amplifier connected by SSCNET cable. Up to 16 servo amplifiers can be connected.
(1) SSCNET cable specifications
Model name
MR-J3BUS015M
MR-J3BUS03M
MR-J3BUS M MR-J3BUS05M
MR-J3BUS1M
MR-J3BUS3M
MR-J3BUS5M-A
MR-J3BUS M-A MR-J3BUS10M-A
MR-J3BUS20M-A
MR-J3BUS30M-B
MR-J3BUS M-B MR-J3BUS40M-B
MR-J3BUS50M-B
(2) Connection between the Q170MSCPU and servo amplifiers
Connect the SSCNET cables to the following connectors.
Refer to Section 4.2.1 for the connection and disconnection of SSCNET cable.
Q170MSCPU
Cable length [m(ft.)]
0.15 (0.49)
0.3 (0.98)
0.5 (1.64)
1 (3.28)
3 (9.84)
5 (16.40)
10 (32.81)
20 (65.62)
30 (98.43)
40 (131.23)
50 (164.04)
SSCNET cable length
MR-J3BUS M use
1) 3m(9.84ft.)
MR-J3BUS M-A use
1) 20m(65.62ft.)
MR-J3BUS M-B use
1) 50m(164.04ft.)
1)
CN1A
CN1B
Servo amplifier
(Note): It cannot communicate if the connection of
CN1A and CN1B is mistaken.
2 - 69
Description
• Q170MSCPU Servo amplifier
• Servo amplifier Servo amplifier
1)
Servo amplifier
CN1A
Cap
CN1B