8
MANUAL CONTROL
This chapter describes the manual control methods for a machine control system.
8.1
JOG Operation
For machine configuration axes, JOG operation of a specified axis can be performed.
Refer to the following for details of JOG operation.
MELSEC iQ-R Motion Controller Programming Manual (Positioning Control)
8.2
Manual Pulse Generator Operation
For machine configuration axes, manual pulse generator operation of a specified axis can be performed.
Refer to the following for details of manual pulse generator operation.
MELSEC iQ-R Motion Controller Programming Manual (Positioning Control)
8 MANUAL CONTROL
86
8.1 JOG Operation