Keysight N2820A User Manual page 40

2 Making Measurements
To Make Measurements Without Interrupting Your DUT
To Use the MBB
Connector
40
Figure 17
1 Solder one or more headers onto your DUT.
2 Snap the sensor lead's socket onto the receptacle.
Once attached to the receptacle, the socket cannot easily be removed
NOTE
without deforming the receptacle. For information on ordering additional
socketed sensor leads, receptacles, and headers, refer to
page 11.
3 Repeatedly plug the lead with MBB receptacle onto different
headers as you probe your DUT.
Socketed Lead Snaps Onto the MBB Receptacle
Table 2 on
N2820/1A User's Guide