Keysight N2820A User Manual page 57

CAUTION
N2820/1A User's Guide
To Identify the R
Figure 25 Remove PC Board
4 On the reverse side of the PC board, locate ID resistor, R2, as
shown in Figure
Figure 26 Location of ID Resistor (R2)
5 Replace the ID resistor with any of the values listed in
default value loaded on the board is 16.2 kΩ. You can purchase a
resistor from a supplier such as Digi-Key corporation.
If you are not skilled in soldering, ask a trained assembler to change the
resistor.
Resistance Using an ID Resistor
SENSE
26.
Using N2825A Probe Heads
Table
3
7. The
57