Keysight N2820A User Manual page 9

Probe Heads
Make-Before-Break (MBB)
Connectors
Channel Identification
N2820/1A User's Guide
3 MHz bandwidth. N2821A probes, having only one channel-input
cable, do not support the simultaneous display of zoomed-out and
zoomed-in views.
There is no upgrade available to convert an N2821A (1 channel) probe to
NOTE
an N2820A (2 channel) probe.
The probe is supplied with the N2822A, N2824A, and N2825A
interchangeable R
heads include different R
user-defined head does not include an R
selected in situations when you want to use your own R
resistor that you have mounted on your DUT. To learn about
configuring and using the heads, refer to
Measurements".
Five Make-Before-Break (MBB) connectors are provided with the
probes. The MBB connectors allow you to quickly probe multiple
locations on your DUT without interrupting the circuit under test.
Refer to
DUT"
When multiple probes are connected to the oscilloscope, use the
Rings
channel identification rings to associate the channel inputs with
each probe. Place one colored ring near the probe's channel
connector and place an identical color ring near the probe head.
probe heads. The N2822A and N2824A
SENSE
SENSE
"To Make Measurements Without Interrupting Your
on page 39 for more information.
General Information
resistor values. The N2825A
resistor and is
SENSE
Chapter 2, "Making
1
Introduction
SENSE
9